邓宗义

基本情况

出生年月：1995.05

职称：讲师

最高学位：工学博士

主要研究方向：（1）极端服役环境近零烧蚀材料：可陶瓷化复合材料、可重复使用热防护材料和梯度防隔热一体化复合材料的多尺度设计、高温原位表征、服役性能评价及新型热防护机制；（2）超轻质隔热材料：可陶瓷化酚醛气凝胶复合材料的可控制备、微结构调控、防隔热机理及功能化；（3）聚合物基复合材料：高性能高分子合成、复合材料成型工艺及复合材料废弃物升级回收。

导师类别：学术型硕导、专业型硕导

工作单位：武汉理工大学材料科学与工程学院

工作地址：特种功能材料技术教育部重点实验室322室

Email:zong_yi_deng@whut.edu.cn

教育及工作经历

2024.07-至今　　　武汉理工大学，材料科学与工程学院，讲师

2018.09-2024.06　　武汉理工大学，材料科学与工程专业，硕博连读

2014.09-2018.06　　武汉理工大学，复合材料与工程专业，工学学士

奖励情况

科研奖励：

2024年，中国复合材料学会科学技术奖一等奖，极端热环境下原位陶瓷化聚合物基梯度防隔热复合材料及其工程应用，排名5/13

2025年，中国复合材料学会卓越论文，Ti3SiC2-LaB6-ZrC改性碳/酚醛复合材料的烧蚀行为及宽温域抗氧化性能，排名1/1

指导学生竞赛获奖：

第十二届中国大学生高分子材料创新创业大赛三等奖（2024年）

第十三届中国大学生高分子材料创新创业大赛三等奖（2025年）

第十九届iCAN大学生创新创业大赛省级三等奖（2025年）

学术兼职

Carbon Neutralization、Engineered Science、Journal of Composites Science、强度与环境和兵器材料科学与工程等期刊青年编委；Coatings客座编辑

近期主持科研项目

2025.03-2027.02，湖北省自然科学基金，重复使用可陶瓷化热防护材料高通量计算、原位构筑与性能衰减机制，主持

2025.09-2025.12，中国船舶集团有限公司第七一一研究所委托项目，高韧性阻燃环氧树脂体系研发，主持

2025.03-2025.12，武汉理工大学自主创新研究基金，纤维增强可陶瓷化酚醛气凝胶复合材料的便捷制备及防隔热性能研究，主持

2025.01-2026.12，特种功能材料技术教育部重点实验室2025年度开放研究基金，可重复使用梯度防隔热一体化热防护材料研究，主持

2020.04-2020.12，武汉理工大学自主创新研究基金，先进复合材料废弃物的高效降解及资源化再利用，主持

近期代表性学术成果

学术论文：

[1]Z.X. Huang, S.X. Weng, M.X. Shi, Z.Y. Deng*, Long-term oxidation resistance and high-temperature load-bearing capacity of ceramizable composite modified by Ti3SiC2 from 600 °C to 1600 °C, J. Eur. Ceram. Soc., 45 (2025) 117208.

[2]Z.X. Huang, Y. Wu, M.X. Shi, L.X. Li, Z.Y. Deng*, A novel Ti3SiC2-CaB6 modified Al-coated carbon fiber/boron phenolic resin ceramizable composite (ACF/BPRC) with excellent long-term oxidative corrosion resistance and high temperature load-bearing capacity, Corrosion Sci., 227 (2024) 111796.

[3]Z.X. Huang, Y.Z. Lu, S.X. Weng, G.Q. Jiang, W.L. Ying, Z.Y. Deng*, Long-term oxidation resistance and reusability of a ceramizable composite for reusable large-area thermal protection of hypersonic aircraft, J Mater Sci Technol., 258 (2026), 256-270.

[4]Z.X. Huang, G.Q. Jiang, X.Y. Yang, Y.B. Wang, Z.Y. Deng*, Ablation behavior and mechanism of Ti3SiC2 modified carbon fiber/boron phenolic resin ceramizable composite, Polym Degrad Stabil, 230 (2024) 111035.

[5]Z.Y. Deng, Y. Wu, M.X. Shi, X.Y. Yang*, Z.X. Huang, Ablation behavior, microstructure, phase evolution and in situ ceramization mechanism of ZrC-LaB6 modified carbon fiber/phenolic resin ceramizable composite, Polym Degrad Stabil, 218 (2023) 110584.

[6]G.Q. Jiang, Z.X. Huang, Y.Z. Lu,Z.Y. Deng*,Matrix modification and fiber coating strategy for synergistic enhancing ablation resistance and high-temperature insulation performance of CF/ Ph composites, Polym Degrad Stabil, 247 (2026) 112001.

[7]Z.Y. Deng, J.L. Yue, Z.X. Huang*, Solvothermal degradation and reuse of carbon fiber reinforced boron phenolic resin composites, Compos. Pt. B-Eng., 221 (2021) 109011.

[8]Z.X. Huang, Z.Y. Deng*, C. Dong, J.M. Fan, Y.L. Ren, A closed-loop recycling process for carbon fiber reinforced vinyl ester resin composite, Chem Eng J, 446 (2022) 137254.

[9]Z.Y. Deng, X.Y. Yang, X.B. Yu, Z.X. Huang, D. Zhu, M.X. Shi*, High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C, Ceram. Int., 49 (2023) 25003-25015.

[10]Z.Y. Deng, M.X. Shi, Z.X. Huang, X.B. Yu, Y. Wu, X.Y. Yang*, Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2, Ceram. Int., 49 (2023) 32490-32502.

[11]X.Y. Yang, L.X. Li, M.X. Shi, Z.X. Huang, Z.Y. Deng*, Ablation resistance and high-temperature insulation capacity of TiB2-B4C modified Al-coated carbon fibre/boron phenolic resin ceramizable composites, Ceram. Int., 50 (2024) 54654-54665.

[12]Z.X. Huang, G.Q. Jiang, D.X Gong, Z.Y. Deng*. Oxidation and Ablation Resistance, Ablation Mechanism of Novel Ti3AlC2 Modified Al-Coated Carbon Fiber/Boron Phenolic Resin Ceramizable Composites. Polym Composite, (2025)

[13]Z.X. Huang, Y.Z. Lu, W.L Ying, Y Liang, Z.Y. Deng*. A bio-based flame retardant from a solvent-free approach endows epoxy resin with satisfactory flame retardancy, smoke suppression and mechanical strength. J Anal Appl Pyrol, 193 (2026) 107500.

[14]Z.Y. Deng, M.X. Shi, Y. Liang, X.Y. Yang*, Z.X. Huang, Phosphorus-nitrogen synergistic flame retardant (PNFR) towards epoxy resin with excellent flame retardancy and satisfactory mechanical strength: An insight into pyrolysis and flame retardant mechanism, Polym Test, 131 (2024) 108352.

[15]Z.Y. Deng, J.M. Fan, Z.X. Huang, X.Y. Yang*, Efficient recycling of carbon fiber from carbon fiber reinforced composite and reuse as high performance electromagnetic shielding materials with superior mechanical strength, Polym Test, 125 (2023) 108110.

[16]Z.Y. Deng, Y.F. Lv, M.X. Shi, Z.X. Huang, W.C. Huang*, A novel fused SiO2 and h-BN modified quartz fiber/benzoxazine resin ceramizable composite with excellent flexural strength and ablation resistance, Polymers, 15 (2023) 4430.

[17]X.Y. Yang, L.X. Li, G.Q. Jiang, Z.X. Huang, Z.Y. Deng*, Flexural strength evolution, microstructure evolution and mechanical strength failure mechanisms of the fused SiO2 and h-BN co-modified quartz fiber/benzoxazine resin ceramizable composites, J Macromol Sci B, 64 (2024) 247-261.

[18]Z.Y. Deng, C. Dong, H.F. Wang, M.X. Shi, X.Y. Yang*, Z.X. Huang, Pyrolysis behavior, pyrolysis kinetics, heat transfer and pyrolysis simulation of almandine/boron phenolic resin ceramizable composites, J Macromol Sci B, 63 (2024) 26-46.

[19]G.Q. Jiang, Y.Z. Lu, S.X. Weng, Z.X. Huang, Z.Y. Deng*, A Review of the Thermal Recycling Methods of Carbon Fibers from Carbon Fiber Reinforced Thermosetting Resin Composites, J Macromol Sci B, (2024) 2387407.

[20]Z.X. Huang, G.Q. Jiang, L.X. Li, Y. Wu, J.L. Wu, Z.Y. Deng*, Thermal stability, flame retardancy and flame retardant mechanisms of hollow glass microspheres/montmorillonite/epoxy sheet molding compound composites, J Macromol Sci B, 63 (2024) 621-633.

国家发明专利：

[1]邓宗义, 应旺林, 黄志雄, 石敏先, 杨雪媛, 万小波, 一种可重复使用、高强韧原位陶瓷化复合材料及其制备方法和应用: CN120116562A,2025-06-10.

[2]邓宗义, 王雪莹, 黄志雄, 翁少雄, 王雁冰, 石敏先, 杨宏伟, 鲁宇瞻, 江国钦, 一种可重复使用热防护材料及其制备方法: CN121427144A,2026-01-30.

[3]邓宗义, 刘谨睿, 应旺林, 翁少雄, 鲁宇瞻, 黄志雄, 一种碳纤维树脂复合材料废弃物的降解及再利用方法: 202510191450.1, 2025-02-20.

[4]黄志雄, 邓宗义, 郭冬云, 石敏先, 丁杰, 一种从碳纤维/酚醛树脂复合材料中回收碳纤维的方法: ZL201910130091.3, 2022-03-11.

[5]黄志雄, 邓宗义, 郭冬云, 石敏先, 刘晓帆, 王大岗. 一种定向断键降解复合材料并从中回收纤维的方法: ZL201910802819.2, 2022-08-16.

[6]黄志雄, 邓宗义, 石敏先, 杨雪媛, 基于热力学计算的抗氧化复合材料设计、筛选和制备方法: CN202310399753.3, 2023-04-13.

[7]黄志雄, 邓宗义, 石敏先, 杨雪媛, 一种选择性陶瓷化的抗氧化、耐烧蚀复合材料及制备方法: CN202311749694.4, 2023-12-19.

[8] 黄志雄, 邓宗义, 王雁冰, 石敏先, 杨雪媛, 生物基反应型阻燃固化剂的无溶剂合成方法及其应用: CN118240163A, 2024-04-02.